Installation
The battery door is installed to the base of the V.360. The door seats firmly to the base of the camera to ensure a secure seal.
Inside the base of the camera there are 4 catch points to which the battery door connects to the V.360. The door must be installed level to the base of the camera.
- With even pressure on the door to the base of the camera
- Rotate the battery door clockwise.
Once installed, the door sits nearly flush with the base of the V.360. A quick reference check to ensure the battery door is level with the base of the camera will conclude that the installation is complete.
Removal
- With even pressure on the battery door
- Rotate the battery door counter-clockwise
When rotating the battery door counter-clockwise, the seal will loosen and unsecure from the base of the camera. You may now remove the battery door.
Comments
0 comments
Please sign in to leave a comment.