How do you install and remove the battery?

Installation

The V.360 has been specifically designed for the battery to install in one direction.

1. Remove the battery door from the base of the camera
2. Holding the "pull" tab on the outside
3. Lower the battery into the camera
4. Once the battery has been lowered into the battery bay, press the battery into the camera until it stops
5. Install the battery door

The battery is now installed into the V.360.

Removal

Use the "pull" tab to remove the battery from the V.360.

1. Remove the battery door
2. Using the pull tab, pull the battery from the battery bay

The battery door may now be installed without the battery or an alternate battery may now be installed.